Features
Suitable for joining and repair welding of light steel fabrications, iron works, wrought iron works, agricultural machines, boiler, chassis of vehicles. Used in all position except vertical-down. Particularly suited for the welding of horizontal fillets. Very smooth weld bead appearance, with easy arc striking and re-striking properties, quite and stable arc with fine-droplet metal transfer. Possible to use equally well both with AC and DC. Slag is completely self-releasing.
Standards
AWS/ASME SFA – 5.1 | E6013 |
EN ISO 2560 – A | E 42 0 RR 12 |
TS EN ISO 2560 – A | E 42 0 RR 12 |
Materials
Width | DIN |
S185 – S355J0 | St 33 – St 52.3 |
P235GH, P265GH | H I, H II |
P295GH | 17Mn4 |
P235TR2 – P355T2 | St37.4 – St 52.4 |
P235G1TH, P255G1TH | StE 35.8, StE 45.8 |
L210 – L360NB | StE 210.7 – StE 360.7 |
S255N – S355N | StE 255 – StE 355 |
GE 200, GE 240, GE 260 | GS 38, GS 45, GS 52 |
AH 32, EH 36 | |
A, B, D |
Typical Chemical Values of Weld Metal
Type of Analysis | C | Si | Mn |
---|---|---|---|
Weld Deposit | 0.07 | 0.45 | 0.60 |
Typical Mechanical Values of Weld Metal(%)
Test Condition | Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Elongation A5 (%) | Charpy V-Notch Properties (J) |
---|---|---|---|---|
As welded | 500 | 560 | 28 | 0°C → 50 |
Welding Positions :
Polarity:
Welding Parameters & Efficiency :
Diameter x Length (mm) | Current (A) |
---|---|
2.00×250 | 40-60 |
2.00×300 | 40-60 |
2.00×350 | 40-60 |
2.50×350 | 60-90 |
3.25×350 | 90-140 |
4.00×350 | 140-190 |
4.00×450 | 140-180 |
5.00×350 | 200-240 |
5.00×450 | 200-240 |
6.00×450 | 260-320 |