Features
GENERAL
- Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.
- Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.
- Separate wire feeding units are standard. Open Cabinet and Smaller Wire Feeding Units for 5 kg (D200) spools options are available.
- 4 roll drive system offers good feedability with long torches and offers less deformation on soft wires such as aluminum and flux cored wires.
- The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request.
- Optimum welding parameters can be obtained from the printed table inside of the wire feed cover.
- Wire feed speed and 2/4 trigger adjustments are on the front panel, Soft Start, Pre-Gas, Post-Gas, Burn-Back timer settings, manual wire feeding & gas valve buttons are inside of the wire feeding cabinet.
- Welding voltage is adjusted from the course and fine switches; increments are optimized to obtain welding parameters with lowest spatter levels.
- Digital displays on the power source for adjusting and monitoring of welding parameters.
- Multiple workpiece connections (Inductance outlets) enables optimum parameter adjustment for low spatter welding.
- ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used.
- 220V AC outlet for CO2 gas heater.
- Built in gas cylinder platform with large wheels to ease mobility in workshops.
- Fan cooling and thermal protection against overheating.
- Standard accessories come with the machine.
TECHNICAL DETAILS
Power Source | ||||
Mains Voltage (3Ph) | 400 | V | ||
Input Power | 10 (%40) | kVA | ||
Welding Current Range | 57 – 250 | A | ||
Nominal Welding Current | 250 (%40) | A | ||
Open Circuit Voltage | 19.7 – 51 | V | ||
Voltage Adjustment Steps | 3 x 7 | |||
Dimensions (l x w x h) | 865 x 510 x 780 | mm | ||
Weight (Net) | 101 | kg | ||
Protection Class | IP21 | |||
Wire Feeder System | ||||
Welding Wire Diameter | 0.60 – 1.00 | mm | ||
Standard Roller Groove Size | 0.80 – 1.00 | mm | ||
Wire Feeder Roller Diameter | 4×37 | mm | ||
Wire Feeding Speed | 1 – 24 | m/dk | ||
Torch Trigger Control | 2 / 4 | |||
Spool Capacity | 20 | kg | ||
Dimensions (l x w x h) | 560 x 225 x 450 | mm | ||
Weight (Net) | 23 | kg |
ACCESSORIES
Code | Name | Dimension | Standard/Optional |
7907000002 | Gas Hose | 2 Meters | Standard |
7905202505 | Ground Clamp And Cable | 25mm2/5mt (35 soket) | Standard |
7120035003 | LAVA MIG 35-3 | 320A (%60 CO2) – 3m | Optional |
7120020003 | LAVA MIG 25-3 | 230A (%60 CO2) – 3m | Optional |
7020009002 | CO2 Heater | MAGMAWELD(220V-75W) | Optional |
7020001005 | CO2 Regulator | W21,8×1/14” ALTTAN AYARLI | Optional |
7020001004 | Argon Regulator | G5/8” ALTTAN AYARLI | Optional |